02-08-2012 11:13 AM - edited 03-19-2019 04:22 AM
Hello
I know this may seem a strange question but I am struggling to find an answer to it and am hoping this is the correct place to post the question and get an answer.
Our organisation currently has a CUCM cluster. When new phones are needed the organisation buys the phones and the required number of licenses for the phones.
Each of the 3 remote sites has a 2851 running in SRST mode if it looses contact with the CUCM servers.
I know all the theory about CUCM etc but I am new to administration on a live network. There are a couple of questions which have been asked lately that I am unclear about.
1. There are some plans to add 4 more remote sites to the system, the question has been asked if more phone licenses need to be bought. I have advised that licenses are bought with the phones (depending on the phone model). The phones are new not spares so they need the licenses.
2. If some of the original sites decided to break away from the current set-up and use their 2851 in CME mode will they need to buy more licenses for their phones. I was unclear of the position on this but I did not think it possible to transfer CUCM licenses to CME.
I am sorry if this is rather a basic question but although I have spent a bit of time looking through Cisco documentation on licensing I am still unclear on the answers to these questions.
I would appreciate any help on this or if someone could point me in the direction where I can find the information
Kind Regards
02-08-2012 04:13 PM
its not possible to change the CUCM license with CME license.
also, you can check the licensing unity report and unit calculator, if you need new license or not.
if you have enough license in license unit report, you dn have to buy a license with the new phone.
let me know if it helps!!
thanks,
Vipul Jindal
02-09-2012 01:38 AM
Thank you for the info but I might not have explained myself properly
We dont want to replace CUCM licenses with CME licenses, it is more a case of if one of the remote sites which currently is registered to the CUCM decides to go on their own and use their 2851 gateway as a CME router can the current licenses on the CUCM system be transfered to the CME.
I thought that the CUCM licenses could only be transferred between CUCM systems but I might be wrong
I was also a bit unsure of what type of phone licenses the CME actually needed.
Thanks for your input
Ellen
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide