cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1494
Views
15
Helpful
2
Replies

CUCM-IM&P compatibility

techguy
Level 4
Level 4

Hi Everyone,

 

We are planning to upgrade CUCM servers only in cluster. But in same cluster we have IM&P & CUC too.

 

Current Versions:

CUCM: 11.0.1

IM&P: 11.0.1

CUC: 11.0.1

 

After upgrading:

 

CUCM: 11.5

M&P: 11.0.1

CUC: 11.0.1

 

Will IM&P & CUC will be compatible with CUCM 11.5? Thanks

2 Accepted Solutions

Accepted Solutions

Georgios Fotiadis
VIP Alumni
VIP Alumni

For CUC there will be no issue, it will work fine.

For IMP though, major and minor version (X.Y - 11.5) needs to match; i.e. you will have to upgrade IMP to 11.5.

Georgios
Please rate if you find this helpful.

View solution in original post

Jaime Valencia
Cisco Employee
Cisco Employee

This is why you need to thoroughly review the upgrade guide and the RN if you're planning for an upgrade

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/upgrade/11_5_1/cucm_b_upgrade-guide-cucm-115/cucm_b_upgrade-guide-cucm-115_chapter_01100.html

 

HTH

java

if this helps, please rate

View solution in original post

2 Replies 2

Georgios Fotiadis
VIP Alumni
VIP Alumni

For CUC there will be no issue, it will work fine.

For IMP though, major and minor version (X.Y - 11.5) needs to match; i.e. you will have to upgrade IMP to 11.5.

Georgios
Please rate if you find this helpful.

Jaime Valencia
Cisco Employee
Cisco Employee

This is why you need to thoroughly review the upgrade guide and the RN if you're planning for an upgrade

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/upgrade/11_5_1/cucm_b_upgrade-guide-cucm-115/cucm_b_upgrade-guide-cucm-115_chapter_01100.html

 

HTH

java

if this helps, please rate