04-04-2016 04:55 AM - edited 03-19-2019 10:56 AM
Hi Cisco Techs,
Have looked at below links for configuring ip address ranges but shows nothing re how Cisco phones get ip addresses.
Can some one please advise further as aboves shows only starting and monitoring.
Thanks again in advance
Solved! Go to Solution.
04-04-2016 08:38 AM
Refer to below document in case you want CM to act as a DHCP server:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/7_1_2/ccmcfg/bccm-712-cm/b02dhsrv.html
Regards
Deepak
04-04-2016 08:13 AM
Not sure what you mean by how they get IP addresses, this will work as any other DHCP server you could have on an ISR/switch/windows/etc
04-04-2016 02:08 PM
I haven't allocated any ip range for this and none is shown to be allocated in this ie server is 192.168.0.12 by adding myself
04-04-2016 08:38 AM
Refer to below document in case you want CM to act as a DHCP server:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/7_1_2/ccmcfg/bccm-712-cm/b02dhsrv.html
Regards
Deepak
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide