05-15-2021 07:17 AM
Hi team,
After the change of the link of internet, there no traffic UDP in Expressway E.
In the Jabber status, is possible to see the packets send, but none is received.
When capture of logs in the Espressway E, is possible to see there no UDP traffic.
In the firewall, all the UDP ports are open and the IPv4 static NAT address is already changed to the new IP of the new link.
Does someone have some idea about why the Expressway E has no UDP traffic?
Best Regards.
05-15-2021 07:32 AM
Have you updated the public DNS A record with the new IP address?
05-15-2021 08:09 AM
If jabber can register via MRA, I think the DNS is ok, but when I Check, the IP of the expressway is different from the IP in the IPV4 Nat Address, how is possible for the jabber to register via MRA?
05-15-2021 08:28 AM - edited 05-15-2021 08:29 AM
IP address of Expressway will be your DMZ IP address. on the expressway E> ip configuration Page if you enabled nat, you have to update the Public IP.
Refer below guide and make sure that your opened ports as mentioned in the document for MRA. (Refer the doc corresponding to your expressway version)
05-15-2021 09:06 AM
What do you mean by that the IP is different? Could you take and post screenshots of the specifics?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide