Hi All....
Please advise me the reason, why the inbound calls to CME got answered automatically.?
I am mentioning the call handling scenario here with..
Trunk Type : FXO
Connection PLAR to physical extension(200)
timeouts call-disconnect 1
timeouts wait-release 1
!
voice-port 0/0/0
trunk-group FXO
cptone AE
timeouts call-disconnect 1
timeouts wait-release 1
connection plar 200
caller-id enable
!
More over I tried with the below configuration also!!!!!!!!!!!! Bad luck !!
voice class custom-cptone UAE-TONE
dualtone disconnect
frequency 400
cadence 400 350 225 525
!
!
voice-port 0/1/0
supervisory disconnect dualtone mid-call
supervisory custom-cptone UAE-TONE
timeouts call-disconnect 1
timeouts wait-release 1
!
dial-peer voice 202 pots
incoming called-number .
direct-inward-dial