IOS video confrence bridge issue in CUCM 11.5

[shiny.rayan]

hi , every body

i hope you are having great day.

i have a problem about adding ios video conference in cucm 11.5.

when i want to add in conference bridge. i dont have any ios heterogeneous or homogeneous video conference bridge.

i have checked data sheet of conference bridge in cucm 11.5  and it was supported.

i have enclose screen shot of conference bridge page.

how can i solve my issue ?

regard

[dpetrovi]

Hi,

Let me move this post to Unified Communications Application community

This community is for Cisco WebEx Meetings Server and Cisco Unified MeetingPlace products and is not observed by CUCM/IOS video conference experts. 

I hope this will get you the answers you need faster.

Kind regards,

-Dejan

[Jaime Valencia · Accepted solution]

Using PVDM3 as a video CFB was never fully supported, and it has been deprecated (for over a year now), that's why it was removed from the GUI

http://www.cisco.com/c/en/us/products/collateral/unified-communications/tdm-gateways/bulletin-c25-735945.html

You need to use CMS or vTP for video conferences.

[shiny.rayan]

thanks for your reply ,

but why this feature is supported in data sheet conference bridge 11.5.

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/11_5_1/sysConfig/CUCM_BK_SE5DAF88_00_cucm-system-configuration-guide-1151/CUCM_BK_SE5DAF88_00_cucm-system-configuration-guide-1151_chapter_01000000.html

[Jaime Valencia · Accepted solution]

It should have been removed, but many times the documentation team just recycles the docs from previous releases and forgets to add/remove as required.

[shiny.rayan]

Dear jaime

thanks a lot

kindly regard

[Adarsh Chauhan]

Hi,

Video Conferencing over IOS is no more supported.

CSCus97643 (PVDM3: IOS based video transcoder and conferencing commands purged)

Because this is no more supported the options from call manager also has been removed.

CSCuw75908 (Feature Deprecation: Remove IOS Video Conference options from CUCM)

I do know there are release notes out there which needs to mention this update.

Please rate and mark correct if helpful.

Regards,

Adarsh Chauhan