01-30-2012 04:35 PM - edited 03-19-2019 04:19 AM
I am attempting to help out a client's 'other vendor' who promised the moon & stars with a CRM. He might be a good programmer, but he has no TAPI or phone experience what-so-ever. As It was I who installed the UC560, they are looking at me for an answer which I would like to provide. My experience with the UC560 is moderate. Is there any API or event driven model for linking an external database (CRM) so pop-ups can occur on local PCs? As a side note, the Call Manager Express ver is 8.2.
Any help pointing me in the right direction would be appreciated. Searching Cisco led me to a lot of items that don't seem compatible with the UC560, but I could be wrong.
Thanks,
William.
PS, the spell check on this Web form does not check after the first paragraph!
Solved! Go to Solution.
02-01-2012 04:50 AM
Hi William
The referenced doc may assist.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/srnd/design/guide/external.html
TAPI Lite / TSP is what you should be looking at.
HTH. Barry
02-01-2012 04:14 AM
Anything that you find compatible with CME, is compatible with the UC500.
So with the right programming skills, you can have a TAPI-based popups, etc.
02-01-2012 04:50 AM
Hi William
The referenced doc may assist.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/srnd/design/guide/external.html
TAPI Lite / TSP is what you should be looking at.
HTH. Barry
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: