07-17-2013 10:07 AM
Hi; any budy knows if the following service parameter in CM (Maximum call duration timer) works only with external calls (outgoing) or for any type of calls (internal, Outgoing, Incoming)
Regards
Juan Carlos Aleman
07-18-2013 08:29 AM
Hi Juan,
This serivce parameters applies to all call types.
-Kevin
05-04-2015 11:04 PM
Hi Kevin,
How can I restrict outgoing calls only up to 30 minutes?
+Vladimir
05-05-2015 05:14 AM
Hi,
Set the 'Maximum Call Duration Timer' CCM service parameter to 30
HTH.
Christian.
05-05-2015 05:29 AM
Thank you, Christian,
I mean, how to restrict outgoing calls only, but all incoming calls are to be without any limitations.
+Vladimir
05-05-2015 07:01 AM
Hi,
You can create a TCL for that and apply it to the GW that connects the external call, please note TCL is not TAC supported.
HTH.
Christian.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide