09-12-2013 08:49 PM - edited 03-19-2019 07:16 AM
Hi all:
I am trying to power on a MCS 7800 and re-install it but the screen just stays blank. I believe those are re-branded IBM servers but I could not find any suggestions on the Cisco nor the IBM support sites.
Anyone any ideas how to get the display working?
Thanks
AR
Solved! Go to Solution.
09-13-2013 04:35 AM
Hi AR,
You will need to try some basic checks here like trying a different monitor, checking the LED status on the motherboard, reseating proc and RAM etc.
Manish
09-13-2013 04:35 AM
Hi AR,
You will need to try some basic checks here like trying a different monitor, checking the LED status on the motherboard, reseating proc and RAM etc.
Manish
09-13-2013 07:09 PM
It was the memory - it works now
Thanks
AR
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide