Buy or Renew
Buy or Renew
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
1404
Views
5
Helpful
10
Replies

Meetingplace outdial

NguyenThanhAn
Level 1
Level 1

‎03-12-2008 12:35 AM - edited ‎03-18-2019 08:36 PM

Hi experts,

I'm a newbie in Meeting Place,I'm confusing about outdial of Meetingplace system. I'd like to ask cisco experts here about this following: user call to Meetingplace system and connect to meeting ID, then the user (the user has call out right)trigger call out to other two users.And now, three users can talk to each other through this meeting.

I'm wondering which implement conferencing function of the system. Which one,CallManager or Audio Server?

Labels:
0 Helpful
10 Replies 10

okuehn
Level 1
Level 1

‎03-12-2008 02:32 AM

Hi,

actually meetingplace is doing the conferencing work and streams the voice to the participants. since meetingplace is responsible, you can also mute participants, see who is talking and also record meetings.

0 Helpful

NguyenThanhAn
Level 1
Level 1
In response to okuehn

‎03-12-2008 02:46 AM

thank for your reply.

Recently, I heard someone said that when call out to the user,Audio Server like a phone Callmanager'll do the conferencing work rather than Audio Server. I think this is reasonless because Cisco meetingplace documents said this outdial feature clearly. I don't understand why someone said as above.

What do you think,experts?

let help me understand about this.

thanks

0 Helpful

usman.amjad
Level 1
Level 1
In response to okuehn

‎03-24-2008 05:57 AM

Hellow every body

I have configured MP 5.4 every thing is working and if i dial from my IPT i can perform every step including scheduling ,attending etc but when i outdial from my meeting place audio server i recieve the error

Placing Call .....Call was unsuccessful: General Outdial error, check the exlog.

and as i look into the eventlogs i see the following

Mon Mar 24 13:53:21 2008 MPNotify (0x150) Information:MeetingPlace connection

is OK

Mon Mar 24 13:53:35 2008 mpccagent mpapi.cpp 87 INFO MeetingPlace IP o

utdial. Phone=11508 IRC=11 PSTN=11 Unit=0

Mon Mar 24 13:53:35 2008 mpccagent radh323call.cpp 929 INFO Placing H.323 out

dial.

Mon Mar 24 13:53:35 2008 mpccagent radh323call.cpp 943 INFO ID=0x0002 MP RTP

info. IP=172.28.80.18 Port=16500

Mon Mar 24 13:53:35 2008 mpccagent radh323call.cpp 944 INFO ID=0x0002 MP RTCP

info. IP=172.28.80.18 Port=16501

Mon Mar 24 13:53:35 2008 mpccagent radh323call.cpp 814 WARN H323:Hook out con

n, unable to set DSCP (104), error code -2145371143

Mon Mar 24 13:53:35 2008 mpccagent mpipcall.cpp 306 INFO ID=0x0002 MP Rqst

. Msg=5 CPerr=0 SeqNum=0x2

Mon Mar 24 13:53:35 2008 mpccagent mpipcall.cpp 326 INFO ID=0x0002 MP Resp

. Msg=5 CPerr=0 SeqNum=0x2

Mon Mar 24 13:53:35 2008 mpccagent workerthread.cpp86 INFO ID=0x0002 Call en

ded.

Mon Mar 24 13:53:37 2008 MPDatSvc (0x15C8) Information: 03/24/2008 - 13:53 :

Replication Service Request Completed. Count=10058

Mon Mar 24 13:53:51 2008 MPNotify (0x150) Information:MeetingPlace connection

is OK

0 Helpful

NguyenThanhAn
Level 1
Level 1
In response to usman.amjad

‎03-28-2008 04:18 AM

Hi experts,

I'm installing Auido Server 8112 and this is my firt time, I configured Auido Server 8112 as configure gude. And when I connect to Audio Server using MeetingTime,but I don't know using which User ID and Password to log in MeetingPlace.

Let help me! thank experts.

0 Helpful

haroon.rasheed
Level 1
Level 1
In response to NguyenThanhAn

‎04-05-2008 06:23 AM

If you configured the components of the meeting place correctly then you can log into meeting time through a Password of the Day which will be provided by Cisco TAC Engineer.

0 Helpful

noeparenteau
Level 1
Level 1
In response to usman.amjad

‎11-10-2008 03:42 PM

I get the same messages:

(read up in time sequence)

I did one for an in-house extension and another for an outside dial pattern. Both failed with the same "MSG=5" condition.

I have double checked all of the Gateway settings and userid/profile settings.

Mon Nov 10 16:38:55 2008 mpccagent workerthread.cpp86 INFO ID=0x0445 Call ended.

Mon Nov 10 16:38:55 2008 mpccagent mpipcall.cpp 326 INFO ID=0x0445 MP Resp. Msg=5 CPerr=0 SeqNum=0x445

Mon Nov 10 16:38:55 2008 mpccagent mpipcall.cpp 306 INFO ID=0x0445 MP Rqst. Msg=5 CPerr=0 SeqNum=0x445

Mon Nov 10 16:38:55 2008 mpccagent radh323call.cpp 826 INFO ID=0x0445 MP RTCP info. IP=10.1.0.27 Port=16481

Mon Nov 10 16:38:55 2008 mpccagent radh323call.cpp 825 INFO ID=0x0445 MP RTP info. IP=10.1.0.27 Port=16480

Mon Nov 10 16:38:55 2008 mpccagent radh323call.cpp 811 INFO Placing H.323 outdial.

Mon Nov 10 16:38:55 2008 mpccagent mpapi.cpp 87 INFO MeetingPlace IP outdial. Phone=17002 IRC=9 PSTN=9 Unit=0

Mon Nov 10 16:53:08 2008 mpccagent workerthread.cpp86 INFO ID=0x0446 Call ended.

Mon Nov 10 16:53:08 2008 mpccagent mpipcall.cpp 326 INFO ID=0x0446 MP Resp. Msg=5 CPerr=0 SeqNum=0x446

Mon Nov 10 16:53:08 2008 mpccagent mpipcall.cpp 306 INFO ID=0x0446 MP Rqst. Msg=5 CPerr=0 SeqNum=0x446

Mon Nov 10 16:53:08 2008 mpccagent radh323call.cpp 826 INFO ID=0x0446 MP RTCP info. IP=10.1.0.27 Port=16491

Mon Nov 10 16:53:08 2008 mpccagent radh323call.cpp 825 INFO ID=0x0446 MP RTP info. IP=10.1.0.27 Port=16490

Mon Nov 10 16:53:08 2008 mpccagent radh323call.cpp 811 INFO Placing H.323 outdial.

Mon Nov 10 16:53:08 2008 mpccagent mpapi.cpp 87 INFO MeetingPlace IP outdial. Phone=818479802923 IRC=10 PSTN=10 Unit=0

also getting this pattern of error messages:

11/10 16:29:13 WARN 0x300d9 0/8, "vuiactgen.cc", 1719 (0xc23, 0x3, 0x4, 0x97)

Place Call Failed. Erc 3107, App 3, App Data 4, Expected App 151

11/10 16:29:13 INFO 0x0 0/3, "cpiphandler.cc", 975 (0x9, 0x9, 0x2, 0)

11/10 16:29:13 INFO 0x0 0/3, "cpiphandler.cc", 958 (0x9, 0x9, 0x1, 0xc23)

11/10 16:29:13 INFO 0x0 0/3, "cpiphandler.cc", 1654 (0x9, 0x9, 0x1, 0xade00006)

11/10 16:29:13 WARN 0x0 0/3, "cpiphandler.cc", 1800 (0x1, 0, 0, 0)

Where are the messages / codes for these ?

Lookin' for leads to track this down.

TIA,

Noe

0 Helpful

NguyenThanhAn
Level 1
Level 1
In response to noeparenteau

‎11-10-2008 06:48 PM

I have same problem, but I solved it.

you should check versions software compatibility in your system.

good luck!

annt.

0 Helpful

noeparenteau
Level 1
Level 1
In response to NguyenThanhAn

‎11-11-2008 04:50 AM

Can you be more specific?

which version of which software?

Here is what I have for software versions:

IPACMP8106:tech$ swcheck

Release 5.4.0 (Built 07/19/06 16:57 MPBUILD-R5_4_0_15)

MODULE NAME STATUS VERSION

SIM UP "07/19/06 16:48 MPBUILD-R5_4_0_15"

LSH UP "07/19/06 16:31 MPBUILD-R5_4_0_15"

SNMPD UP "07/19/06 16:59 MPBUILD-R5_4_0_15"

DBSERVER UP "07/19/06 16:35 MPBUILD-R5_4_0_15"

DBQSERVER UP "07/19/06 16:35 MPBUILD-R5_4_0_15"

POSERVER UP "07/19/06 16:43 MPBUILD-R5_4_0_15"

CPSERVER UP "07/19/06 16:42 MPBUILD-R5_4_0_15"

CONFSCHED UP "07/19/06 16:47 MPBUILD-R5_4_0_15"

WSSERVER UP "07/19/06 16:48 MPBUILD-R5_4_0_15"

VOICESERVER UP "07/19/06 16:55 MPBUILD-R5_4_0_15"

GWSIMMGR UP "07/19/06 17:03 MPBUILD-R5_4_0_15"

Versions

Modules

MeetingPlace Agent 5.4.70.0

MeetingPlace Audio Service 5.4.70.0

MeetingPlace Conferencing Gateway 5.4.70.0

MeetingPlace Conferencing GCC 5.4.70.0

MeetingPlace Conferencing MCS 5.4.70.0

MeetingPlace Conversion Agent 5.4.70.0

MeetingPlace Gateway SIM 5.2.0.60

MeetingPlace Replication Service 5.4.70.0

MeetingPlace Master Service 5.4.70.0

MeetingPlace Extension 5.4.70.0

MeetingPlace Authentication Filter 5.4.70.0

0 Helpful

noeparenteau
Level 1
Level 1
In response to NguyenThanhAn

‎11-11-2008 06:06 AM

Thanks that's just what I was looking for.

Noe

0 Helpful
Customers Also Viewed These Support Documents