Environment:
Cluster --> 2 CUCMs - System version: 7.1.5.10000-12: CM voip1 and CM voip2. CM voip1 is the publisher and CM voip2 is the subscriber.
GW --> 2 Cisco 2811 - version 12.4(13r)T.
When configuring mgcp GW on CUCM, I verified that Cisco 2811 suports only ISDN.
Currently there are 2 E1 R2 digital circuits connecting PBX and PSTN.
Is there any protocol that enables usage of CUCM controlling GW E1 R2 digital circuits ?
