ā01-13-2015 04:26 AM - edited ā03-19-2019 09:01 AM
Hi I am using cucm9.1, i want to configure mobile voice access.
These are the scenarios,
1, My internal DN scheme is like XXX
2, My Head number or Gateway number is 8090(Accesible from PSTN)
3, I have already configured Remote destinations for the users
4, When external call come to 8090, first it will be routed to system call handler
But i have no idea what number should i use for MVA DID. does it has to be like xxx or something else?
ā01-13-2015 08:55 AM
You can follow below doc, if you get stuck somewhere then pls post here back.
http://bhatkoti.com/2010/01/02/how-to-configure-mobile-voice-access-mva-in-cisco-cucm-6-x7x/
Suresh
ā01-13-2015 10:06 PM
I follow the link but......Error 404
Page not found
ā01-13-2015 10:19 PM
The number can be any number, that you can call for outside or in other words it should be a DID number.
Follow below link whichever you like for config steps:
http://duzceli1979.blogspot.com.au/2013/04/mobile-voice-access-mva-configuration.html?m=1
http://pandaeatsbamboo.blogspot.com.au/2012/02/mobile-voice-access-mobile-connect-step.html?m=1
Terry
Please rate all helpful posts
ā01-14-2015 01:05 AM
Thank you Terry for you reply
Okay I assigned 111 for my MVA, but i can`t call 111 from my remote destination or any other PSTN. So what do i have to do to call to 111. do i have to first dial 8090(my gateway number) then press111.
Please help am confused Here...............Thanks!!!!!!!!!!!
Ermias W
ā01-14-2015 01:52 AM
MVA number should be reachable from outside - it should be one of your DID/DDI/ or main number as you say.
-Terry
ā01-14-2015 02:19 AM
Tnx man!!!!!!!!! That`s what i want to know
ā01-14-2015 02:37 PM
No Worries and don't forget to rate all helpful posts and mark thread as answered if you have no other queries.
-Terry
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide