Hello, Cisco tech.
I need you advise on below:
I got the following call flow: Remote PBX --> Cisco CUBE --> CUCM
When i got incoming call from Remote PBX i see only extension number with out alerting name.
Remote PBX support has no option to enable caller id transfer.
I wonder to route this call via Cisco CUBE and make:
a) voice class sip-profiles 1
b) modify(add user name\caller name) inside
c) assign it to outgoing dial-peer.
Assume i should modify:
1)
Remote-Party-ID parameter (like Remote-Party-ID: "Remote User1" <sip:768987@10.1.1.1>)
OR
2)
From parameter ( like "From: <sip:
768987@10.1.1.1>"
to:" "Remote User1" "
<sip:768987@10.1.1.1>"
Will you able advice a best way to do this. Logs in attach,
I am trying with Remoe-Party-id like below but i still see only number on my Cisco phone on CUCM
request INVITE sip-header Remote-Party-ID modify "<sip:(
768987)@.*>" "<Remote User1:\1>"
Please help.
Thanks in advance