Need reference of CCME on cisco 2821

[nicanor00]

Hello;
I have a router cisco2821-sec/k9 and I want to install the CCME (Cisco Call Manager Express) with 40 users  license

What is the reference (to purchase) of the  CCME software with 40 users  license for the router cisco2821-sec/k9

The IP phone CP-521SG and CP-524SG  can operate with a CCME installed on the Cisco 2821?

If not what kinds of the most cheap cisco IP phone can operate with a CCME installed on the Cisco 2821 router

Thank you in advance

[Rob Huffman]

Hi There,

When you purchase a CME feature License (to implement CME) it is based on the number of users and includes the appropriate user Licenses.For example, if you were setting up an office with 40 users you might order;

FL-CCME-48

Which would leave you room to expand by 8 new people somewhere down the road.

The 500 series of phones are NOT supported on CME, so the next well-priced model suggestion

might be the 7931

7931 Data Sheet

http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/phones/ps379/ps7062/product_data_sheet0900aecd80534259.html

Cheers!

Rob

Please support CSC Helps Haiti

https://supportforums.cisco.com/docs/DOC-8895

https://supportforums.cisco.com/docs/DOC-8727

[nicanor00]

what dou you think about 7911G and 7912G

Which most chiper ip phone is adapted for the standard ?

I want to use 20 7911G, 10 7912G  and 10 7931G

[Rob Huffman]

Hi there,

The 7912G has been announced as "End of Sale" "End of Life", so probably not the best choice (see attached)

EoS and EoL for Cisco Unified IP Phone 7912G

http://www.cisco.com/en/US/products/hw/phones/ps379/prod_eol_notice0900aecd80538042.html

You probably want to go with the 7911G, which is the Cisco recommended replacement model.

http://www.cisco.com/en/US/products/ps6565/index.html

Cheers!

Rob

[nicanor00]

Hi will buy FL-CCME-48 for my cisco 2821 ,  5 ip phone 7945G and 30 ip phone 7911G

Do I need 5 CP-7945G-CCME or 5 CP-7945G should be OK ?

[William Bell]

That depends on licensing. The phone models are identical. The -CCME version has a licensing component. If you already have licenses you should be good to go. If you have licenses from a CUCM install, you may still be good to go but would have to dance with your Cisco AM to get it worked out.

HTH.

Regards,

Bill

[nicanor00]

Finally I choose to buy this element in the table

I already have the router cisco2821-sec/k9 and one cisco switch poe

Please the system will work or do I need additional requirement ?

Reference	Quantity
FL-CCME-48	01
VIC2-4FXO	01
7945G	05
7911G	25