07-22-2019 01:22 AM
I am facing issue with NTP synchronized on Subscribers where as it is synchronized correctly on Publisher. How can i resolve this issue. Please help.
admin:utils ntp status
ntpd (pid 3007) is running...
remote refid st t when poll reach delay offset jitter
==============================================================================
10.19.240.90 .INIT. 16 u 40 64 0 0.000 0.000 0.000
unsynchronised
polling server every 8 s
Current time in UTC is : Mon Jul 22 07:52:01 UTC 2019
Current time in Asia/Riyadh is : Mon Jul 22 10:52:01 AST 2019
All the diagnostic information is attached here.
Thank you.
07-22-2019 08:17 AM
Are you using FQDN or IP address, if you are using FQDN can you try to use IP address and see if it resolves the issue.
07-23-2019 02:25 AM
Couple of things to check:
1. is your publisher using 10.19.240.90 (same as sub) as NTP or 10.19.240.90 is the pub ?
2. is your NTP 10.19.240.90 reachable from sub ?
3. is your dbreplication fine in CUCM cluster ?
If 10.19.240.90 is not your pub, then you can try to set your sub NTP as your pub, which is mostly used in case of CUCM clusters. Dont forget to restart your NTP service on sub when you change the NTP server details.
07-23-2019 06:47 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide