04-10-2020 12:06 AM
Version:Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.4(3)M3,
call Flow: IP Phone (SCCP)---Diling out using---T1--> PSTN
after one ring call getting Disconnected
Solved! Go to Solution.
04-23-2020 05:13 AM
the issue is resolved, there is no issue from the router end,
call flow IP Phone(SCCP)--->CME--->T1--->Avaya PBX---> call FWD---another DID Number
Call is getting Failed to due to Delay in response after cutting down the Avaya PBX and dialing Direct DID is working Fine now,
Initially i was not aware of the complete call flow.
04-10-2020 08:07 AM
What does the debugs say about the call?
04-10-2020 08:24 AM
04-23-2020 05:13 AM
the issue is resolved, there is no issue from the router end,
call flow IP Phone(SCCP)--->CME--->T1--->Avaya PBX---> call FWD---another DID Number
Call is getting Failed to due to Delay in response after cutting down the Avaya PBX and dialing Direct DID is working Fine now,
Initially i was not aware of the complete call flow.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide