08-10-2018 03:54 AM
Can anyone explain what below configuration says.
DSP groups on slot 0/4 slot id 4
dsp 1:
State: UP, firmware: 46.2.2
Max signal/voice channel: 64/64
Max credits: 960, Voice credits: 960, Video credits: 0
num_of_sig_chnls_allocated: 0
Transcoding channels allocated: 5
Group: FLEX_GROUP_VOICE, complexity: FLEX
Shared credits: 352, reserved credits: 0
Signaling channels allocated: 0
Voice channels allocated: 0
Credits used (rounded-up): 0
Group: FLEX_GROUP_XCODE, complexity: HIGH
Shared credits: 0, reserved credits: 150
Transcoding channels allocated: 0
Credits used (rounded-up): 0
Group: FLEX_GROUP_CONF, complexity: CONFERENCE
Shared credits: 0, reserved credits: 458
Codec: CONF_G729, maximum participants: 8
Sessions per dsp: 10
Slot: 0/4
Device idx: 0
Dsp Type: SP2700
08-11-2018 09:54 AM
I highly recommend reviewing this post, which lays it out line by line:
Understanding the output of "show voice dsp group all"
Thanks!
Ryan
08-15-2018 05:54 AM
You may refer to this document created by Ayodeji Okanlawon,
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide