02-22-2012 03:12 PM - edited 03-19-2019 04:27 AM
I would like to change the Application and Administrator password in the CLI, but when I execute the utils reset_application_ui_administrator_password and utils reset_ui_administrator_password commands at the CLI I get the following errors;
Update FAILED: code = 21, DUPLICATE CREDENTIAL. Is there a step that needs to be done that I'm missing?
Solved! Go to Solution.
02-22-2012 04:46 PM
Perhaps the password you are attempting to change it to is the same one or something that was recently used?
Chris
02-23-2012 05:12 AM
Hi Shikamarunara,
Hope life is treating you well my friend
This "Policy" is what you are likely seeing;
Error: Repeat credentials prohibited by credential policy
Repeat credentials prohibited by credential policy
This issue is caused when you try to reuse the same password. The value for the Stored Number of Previous
Credentials parameter specifies the number of previous passwords that Cisco Unity Connection (CUC) stores
for a user. If this parameter is set to a value other than 0, when a user enters a new password, CUC compares
it to the stored passwords, and rejects it if it matches a password in the history. The default setting for this
parameter is five passwords.
Stored Number of Previous Credentials
As a best practice, specify a number in this field. By doing so, you enable Connection to enforce password uniqueness by storing a specified number of previous passwords or PINs for each user. When users change passwords and PINs, Connection compares the new password or PIN with those stored in the credential history. Connection rejects any password or PIN that matches a password or PIN stored in the history.
By default, Connection stores 5 passwords or PINs in credential history.
http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/security/guide/8xcucsec060.html
Cheers!
Rob
02-22-2012 04:46 PM
Perhaps the password you are attempting to change it to is the same one or something that was recently used?
Chris
02-22-2012 05:12 PM
It's the same account I'm using to log into the cli to change the password. It occurred to me that that may be the problem, but I've not seen this kind of limitation before in any modern OS.
Sent from Cisco Technical Support iPad App
02-23-2012 05:12 AM
Hi Shikamarunara,
Hope life is treating you well my friend
This "Policy" is what you are likely seeing;
Error: Repeat credentials prohibited by credential policy
Repeat credentials prohibited by credential policy
This issue is caused when you try to reuse the same password. The value for the Stored Number of Previous
Credentials parameter specifies the number of previous passwords that Cisco Unity Connection (CUC) stores
for a user. If this parameter is set to a value other than 0, when a user enters a new password, CUC compares
it to the stored passwords, and rejects it if it matches a password in the history. The default setting for this
parameter is five passwords.
Stored Number of Previous Credentials
As a best practice, specify a number in this field. By doing so, you enable Connection to enforce password uniqueness by storing a specified number of previous passwords or PINs for each user. When users change passwords and PINs, Connection compares the new password or PIN with those stored in the credential history. Connection rejects any password or PIN that matches a password or PIN stored in the history.
By default, Connection stores 5 passwords or PINs in credential history.
http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/security/guide/8xcucsec060.html
Cheers!
Rob
02-23-2012 07:47 AM
Helpful as always, Rob. How's life treating you? You set me on the right path, that error was confounding me! Thanks, again!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide