Hello
Today, I had a strange issue with calls at a site where all outbound calls were failing. A reboot of the router fixed the issue but it seems like the route group did not work as I expected.
My current setup for the site is 2 routers each with a PRI connection to the carrier.
Both of these are in a route group attached and was set up in a top down style:
Router 01
Router 02
I have amended it to be circular since. For some reason, with Router2 being unavailable, all outbound calls failed despite Router1 being available. Looking at the logs, it does seem that both PRI lines carry calls normally. But I have no idea why this occurred otherwise?
Any experts have any ideas?
Thanks
FF
