05-11-2010 10:41 AM - edited 03-19-2019 12:55 AM
Running CUCM 7.1 and using RTMT version 8.1.
I want to Trace H323 activity on ONE Gateway. How do I do that with the versions I have?
I know I could select individual devices in older trace settings (3.x,4.x etc) cannot figure out
how to do it with the RTMT and Linux systems.
Thanks
Solved! Go to Solution.
05-11-2010 10:51 AM
If you mean to enable the traces you still do that at the serviceability page on CUCM under trace settings
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk
05-11-2010 10:51 AM
If you mean to enable the traces you still do that at the serviceability page on CUCM under trace settings
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk
05-11-2010 11:05 AM
I want the CUCM to trace H323 activity on ONE of my multiple H323 gateway (10.1.1.1) not all at once.
I go into servicability and cannot see where I can get specific and pick only one gateway.
05-11-2010 11:14 AM
yes I found it. Forgot it was grayed out. Thanks!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide