Hi to all......
we have an uc 540 with 6 trunk lines.we configured it using CCA 3.0.Everything went smoothly and after that
we have created two dial plans in uc540 as follows.
1) name:- open/unrestricted access code :- 9 begins with 9[0-9] number of digits:- variable dial pattern 9[0-9]T Trunk priority........
2)name:- national access code :-9 begins with 9[0-9] number of digits:- 11 dial pattern 9[0-9]xxxxxxxxxxx Trunk prior..
when we assign the 2nd dial plan to a particular phone in phone groups>users > phones >particular extension number.......
the dial plan is getting applied to all the phones.................
after that if we apply the first dial plan to any particular extension ........it is getting applied to all the phones again.....
Eventually i think only one dial plan is working at one particular time......
all the phones are in group pick-up.
Please if anybody could suggest what is the problem and what could be its solution also.......
