Unity Connection cluster issues

[jeff.singh_2]

Hi

we have Unity Connection 8.6 cluster across 2 datacentres.

On the pub we cannot see the sub - under cluster management , shows as not available.

On the sub however we can see the pub and the sub.

We did do an IP address change on these boxes and have also had firewall issues - is this likeley to be a a firewall issue or an IP address change issue ?

Host file shows correct IP addresses at each end.(show tech network hosts)

any advise appreciated.

Jeff

[Manish Gogna]

Hi Jeff,

Can you post the output of the following

Show cuc cluster status

Such an issue can come up after IP address changes as well. If the cluster was rebooted after IP address change then you may try reverting the IP address changes if possible to verify the same.

HTH

Manish