Upgrading Voice Gateways

[gregorymahoney1]

We are upgrading our vg350s to vg450s. Is there any guidance out there on how to copy or export/import the analog endpoints from one VG to a new VG? I don't really want to hand jam everything in from scratch as far as the end points go. Configurations I pretty much got down as I will be nearly copying everything from the old to the new with some minor changes obviously. Thank you very much!

[Flavio Miranda]

Hi

Take a look on this doc, it might help

 https://www.cisco.com/c/en/us/support/docs/unified-communications/bulk-administration-tool/118882-config-vg-00.html 

[gregorymahoney1]

Thank you. I'll check it out when I return to work in the morn'. 

[Jonathan Schulenberg]

FYI- The VG450 is replaced by the VG420 as the generational refresh of the underpinning router platform they are based on occurs (ISR 4K to Cat8k).

[gregorymahoney1]

Well as they were purchased in mass quantity for several departments within our organization there is nothing I can do or let alone have a say in what the higher ups purchased. All I can do is work with what's been handed down to us. Thanks for the info though.