Urgent please, Cisco sip VG224- applying translae rule on voice port

- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-06-2015 10:52 PM - edited 03-19-2019 09:33 AM
Dear associates,
I have Cisco Vg224 working as SIP router (sipv2). I'm confused on applying translate rule on some voice ports. but still not working. Im trying to allow some voice ports to call outside the network by forward calls to CUCM using sip trunk. below attached router configuration, any idea will be appreciated.
Regards
- Labels:
-
UC Applications

- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-07-2015 06:21 AM
Why not just make a Cor list for the phones and apply those Cor lists to the dial-peers?
http://www.cisco.com/c/en/us/support/docs/voice/call-routing-dial-plans/42720-configuring-cor.html
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-11-2015 02:13 AM
Brandon,
Really i cant apply cor list configuration to FXS port, I have cisco VG224 with (24 FXS ports). chick attachment below please.
Thanks
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-11-2015 05:54 AM
You have to setup the FXS ports to be controlled by CME as SCCP then setup the COR lists. Additionally, your translation profiles are not even applied, you might want to review this:
http://www.cisco.com/c/en/us/support/docs/voice/call-routing-dial-plans/64020-number-voice-translation-profiles.html#configs
Example:
voice-port <number>
translation-profile [incoming | outgoing] <name>
trunk-group <name> [preference]
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-12-2015 02:57 AM
Brandon,
Regardless of COR lists and controlling FXS ports by CME as SCCP. I did what cisco explained in the above link which you graciously paste. ( attached pic.s below ). and the result was the same. when employee on voice port 2/21 pick up the phone and dials 07xxxxxxxxx he only gets busy dial tone. while when I dial 92307xxxxxxxxx from ip phone connected directly to cucm 172.23.167.9 I could reach the destination called number.
The only stopping point that I face now as i think is, how to apply the translation rule on voice port 2/x.
we have holiday for the next two days so we got time to look for it.
Thanks for your response to me.

- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-24-2015 09:30 PM
any update ..??
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
08-26-2015 11:35 PM
Brandon,
Thanks for your response
I’m Compelled to use SIP protocol, cause my clients wants permanence telephone service from their FXS ports even of the link between the CUCM and them Vg224 disconnected. SIP protocol provides me with this feature.
why I couldn’t apply translation rule as it described in above posts on SIP VG router ???
Thanks for help
