VIC3-2FXS/DID-Analog fax config-2901 when changing MGCP PRI to SIP ITSP connectivity

[anilkumar.cisco]

Hello Team,

My customer is migrating MGCP based PRI in Cisco 2901 VG to SIP ITSP type PSTN connectivity..

They also have mgcp controlled based analog phone connected to VIC3-2FXS/DID card..

i am not sure after migrating to SIP/CUBE like architecture, how analog phone will be register or work on these card.

Any support highly appreciate..

________________________

extract of my current VG configuration for analog port

dial-peer voice 99901990 pots
service mgcpapp
port 0/1/0
!
dial-peer voice 99901099 pots
service mgcpapp
port 0/1/0
!

https://www.cisco.com/c/dam/en/us/support/docs/unified-communications/vg-series-gateways/analog-fxs-port-sip-registration-with-cucmv2.pdf

i got the above link , but not able to see, whether VIC3-2FXS/DID card will support these particular configuration or not 

Best Regards

Anil Singh

[Roger Kallberg]

Please do not post the same question in multiple parts of the community.

[anilkumar.cisco]

Agree, but was not able to delete it from here..

Do you know how to delete any post after publishing as I was not able to do it