Add automatical directory numbers and device profiles from Active Directory users
I've two questions.
1. I try to add automatically only all extension numbers from "telephoneNumber" field inside my Active Directory to the directory numbers of my CUCM 8.6.2
I've stored the numbers as follows at my AD users, like +49 89 123456 7890
Pre select for town
2. I've only the following IP Phone type 7962 at my enviroment. My CUCM 8.6.2 is connected to an Active directory system, where I stored the phone number at the 'phoneNumber' field like I explained above
Now is it possilbe, to generate automatical device profile for each user of the OU which I sync to the CUCM, like e.g. USERID_7962 and add the phone number to the first line?
Not there's no way. Device profile can't be sync from LDAP, it need to be created manually or using bulk administration tool.
Please remember to rate useful posts clicking on the stars below. Favor calificar todos las respuestas útiles dando click en las estrellas de mas abajo. ___________________________________________ LinkedIn Profile: do.linkedin.com/in/leosalcie
__________________________________________________ Please remember to rate useful posts clicking on the stars below. LinkedIn Profile: do.linkedin.com/in/leosalcie
hi Team, we are planning to deploy Multi-Factor Authentication for Jabber. The main requirement is to use MFA over internet (MRA).Is it possible to deploy MFA just for MRA and don't touch impact any on-prem existing setup?Can someone please guide on ...
Looking to expand your professional network? Interested in gaining an edge with exclusive technology insights? Engage with Cisco experts, share feedback on products and connect with peers from across the globe. Cisco Champion 2021 applications are open fo...
UCCX does not natively protect HTTP Triggers.
I wanted to come up with a solution to handle HTTP cookie based authentication.
There is a zip file for this project attached to this article. It was written on UCCX 12.5...
CUCM can backup the manually or have sehchduler to backup the configuration and historical reports from the server diester recovery systemStep 1. Navigate to CUCM > Disaster Recovery System > Backup > Manual Backup as shown in the...