Hello.I´m trying to upgrade CUCM 7.1.5 to CUCM 8.6 into MCS 7825I4.According the compatibility matrix i need to add 2 MB of RAM more.MCS 78252GBFor version 8.0(3) or higher, 4 GB strongly recommended, required for 8.6(1)+My question is, if i buy th...
Hello everybody,I allways get stuck when I try to find a cop file like this.I have the cisco jabber 9.1.0 for Windows 7. CUCM version is 8.6.2.Which would be the cop file that I have to install on the CUCM before installing the jabber on the PC? D...
HiI have a cucm 8.0.3 appliance, i'm migrating to vmware but when i restore the backup in the vmware i lost like 20 services (network services), how can i fix it?Thanks
Hello there,I have CUCMBE installed on a virtual machine. The system is set up fine with 2 VM ports. However as this is a test enviroment I thought I would have licenses for at least a couple of voice mail users. This is usually the case for Unity ...
Good Day,I have problem with HA on cisco presence cluster , the error is showing that Node status for the high avaliability is (Running in Backup Mode) and Node Reason (Peer Down During Initialization). I have restart Sip proxy service as request fr...
I have a "UCS C220 M3" without hard disk, only with SD Memory 16Gigas (with the base operating system). Additionally I have a Storage IBM.How I can map the IBM STORAGE the "UCS" to install my VMWare (cisco Prime)?Cisco UCS : have only ethernet portsS...
So here is the scenario. I have some phone login users to contact center. Since they do not have the functionality of having the directory that they can create if they had the AGENT, I would like them to have a directory that they can modify in the u...
Hello,we configured a 221 with cucm 9.1.1.Outgoing calls with SIP is working.When receiveing incomming calls we get a SIP/2.0 404 Not Found.Below the debug ccsip messages from incoming call en vocierouter configWe call with 0031408449920 to 314023102...
hi everybody, We are currently having issue with the Cisco Call Manager Business Edition, for our client. We can not access the GUI remotely, and we do not have the console password to log in locally.We need to rebuild the server, bu...
Hi all,I have used CUCM as call controld and TFTP server but never used CUCM as a dedicated TFTP server.Do you know what serivces should be enabled on CUCM box as a dedicated TFTP server?Version is 8.6.2a and here is what I have:Under "CM Services"- ...
Hello, I’m having an UC 9.1.1 environment. On the moment I’m testing DVO-R in combination with Jabber on Android. When configuring the DVO-R in CUCM with al settings to do, I notice you cannot set the CSS per user to determine what the user may call ...
