01-18-2018 05:55 AM - edited 03-19-2019 01:04 PM
hi all,
i want to change my domain in presence, i already follow the step that wrote in there,
"Default Domain or IM Address Scheme cannot be changed until the following services are stopped on all nodes :
Cisco Presence Engine
Cisco SIP Proxy
Cisco XCP Router
Cisco Sync Agent
Cisco Client Profile Agent"
but still the domain is disable to change.
can you all help me, please,
thanks
Solved! Go to Solution.
01-18-2018 08:09 AM
Hi,
You need to change domain from CLI as well which requires reboot of server.
set network domain
regds,
aman
01-18-2018 06:06 AM
Are you sure you stopped all of the services on all IMP nodes?
I have done it many times without issues.
01-18-2018 06:39 AM
01-18-2018 08:09 AM
Hi,
You need to change domain from CLI as well which requires reboot of server.
set network domain
regds,
aman
01-18-2018 08:13 AM
Aman,
That would only be needed if the domain of the server itself needs to change, which is not a requirement for changing Jabber domains.
01-18-2018 03:37 PM
hi aman and chris thanks for replied,
aman, i will test your suggestion
chris, i need to change domain because our microsoft lync is move to another domain, and this impact to our click to call in microsoft lync.
thanks
01-19-2018 11:14 PM
Hi Chris,
thanks for info.
Can u please clarify how Jabber domain is different from Server domain?
regds,
aman
01-20-2018 04:54 AM
hi aman,
it works, thanks,
first i set the domain via cli, then i set via gui with stop all services as needed, and not disable anymore and i can change the domain.
thanks all for discussion to help me.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide