06-21-2011 11:43 PM - edited 03-19-2019 03:09 AM
Im trying to install CUCM 8.0.3 in VMware with the following virtual configuration in my Lab.
Harddisk size - 100GB
RAM - 4 GB
OS - Redhat Lunix 4 with 32 bit
The installation begins and some 218 and 324 files are getting installed respectively, after that im getting a Blue screen with curser blinking and the installation process hangs there itself
If i tried to restart the VMware instance im getting the following error "Installation Failed. Restart installation to recover from failiure"
Can anyone guide me how to install CUCM 8.0.3 in vmware.
06-22-2011 02:22 AM
Have you checked media before instalation? Commonly media failures can cause such issues.
06-22-2011 02:30 AM
Hi,
Yes Media check was succeddful. I believe after media check pass only installation will proceed.For me after the installation the VM instance got reboot and then im getting a blank screen.
06-22-2011 06:18 PM
Have you tried using the OVF template?
06-22-2011 11:22 PM
Hi John,
No i havent tried...could you help me to know more abt this OVA/OVF..
But i have installed CUCM 7.1.5 in VMware without this OVA/OVF. is it needed for 8.x and above versions of CUCM ???
06-22-2011 11:46 PM
Try 120 GB for disk size. RAM and OS are fine.
Glenn D
06-23-2011 01:16 AM
Hi Glenn,
Changed the HD size to 120Gb, but still getting the same Blue screen. Refer attached image. Getting this kind of blue screen after the installation process gets over.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide