11-11-2016 02:02 PM
I've set up the user with the right access, I'm able to login to CUCM 10.5 in the web browser with the user and password that I've set up but Prime keeps saying the HTTP login to CUCM is incorrect.
Any ideas?
11-11-2016 03:07 PM
PCP talks to CUCM only through the AXL API. That should have a different login and password that would have been setup in CUCM, and would need the same credentials reflected in the PCP setup for the CUCM AXL interface (in Device Setup). Refer to the PCP installation guide for more details for adding a new device to PCP.
Regards
11-14-2016 06:16 AM
I set up a user that has AXL API access.
I'm also following guides here for Prime Collaboration Assurance.
http://www.cisco.com/c/en/us/support/cloud-systems-management/prime-collaboration/tsd-products-support-series-home.html
11-14-2016 11:11 PM
Hi. Did a quick test on my lab, adding CUCM 10.5.2 to PCA 11.5 Standard version. Steps complete successfully as detailed in the documentation. Screenshots are available at https://cisco.box.com/s/cbkqo2xtjtlrfuv21vscnxpe8bg9nj4d. I suggest you use the latest version of PCA available on the Cisco Download site (that is 11.5). /Phil
11-15-2016 06:09 AM
Maybe I'm missing a permission for the user. Is there a list somewhere of the exact permissions the user needs?
11-15-2016 08:10 AM
This is detailed in the Configure Devices for PCA document available at http://docwiki.cisco.com/wiki/Configure_Devices_for_Prime_Collaboration_Assurance#Cisco_Unified_Communications_Manager
and also in the screenshots I sent you:
/Phil
11-30-2016 08:16 AM
I have done all of this. I updated to 11.5, I added a new user, I added all these permissions, I made sure all of the services are activated. It still says "Wrong Credentials". I've changed the password 10 times to make sure it's right. Nothing seems to be working.
I'm running out of ideas.
11-30-2016 08:48 AM
Then the only thing I can think of is getting together on a webex session where you can share access to PCA and CUCM so that I can take a look. Just drop me an email to pbeaupie@cisco.com with your availability and I will set up a webex for you. /Phil
11-14-2016 10:54 AM
Following these instructions to add a device. https://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/collaboration/11-0/Assurance/Standard/Guide/Cisco-Prime-Collaboration-Assurance-Guide-Standard-11_0/Managing_Devices.html#ID14
I keep getting an invalid credentials error. I've checked a dozen times and the credentials are correct.
Also, I've tried another product that uses the AXLAPI to monitor CUCM and tried the same user/pass and that product works fine.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide