cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
868
Views
0
Helpful
2
Replies

Question on PVDM4-64 in 4351 router

Pointbreak
Level 1
Level 1

Can anyone explain what below configuration says.

 

DSP groups on slot 0/4 slot id 4
dsp 1:
State: UP, firmware: 46.2.2
Max signal/voice channel: 64/64
Max credits: 960, Voice credits: 960, Video credits: 0
num_of_sig_chnls_allocated: 0
Transcoding channels allocated: 5
Group: FLEX_GROUP_VOICE, complexity: FLEX
Shared credits: 352, reserved credits: 0
Signaling channels allocated: 0
Voice channels allocated: 0
Credits used (rounded-up): 0
Group: FLEX_GROUP_XCODE, complexity: HIGH
Shared credits: 0, reserved credits: 150
Transcoding channels allocated: 0
Credits used (rounded-up): 0
Group: FLEX_GROUP_CONF, complexity: CONFERENCE
Shared credits: 0, reserved credits: 458
Codec: CONF_G729, maximum participants: 8
Sessions per dsp: 10
Slot: 0/4
Device idx: 0
Dsp Type: SP2700

2 Replies 2

ryanticer
Level 1
Level 1

I highly recommend reviewing this post, which lays it out line by line:

Understanding the output of "show voice dsp group all"

 

Thanks!

Ryan

Flo.Matalis
Level 1
Level 1