05-24-2018 01:07 PM - edited 03-01-2019 01:33 PM
I have a Cisco 5108 with 4 PSUs. PSU1 and 4 are flashing green lights (According to the CISCO UCS 5108 Server Chassis Installation Guide a blinking green light indicates the AC power is present but the PS is either in redundancy standby mode or is not fully seated.) PSU2 and 3 are solid green.
I reseated PSU1 and 4 but they are still flashing green. How do I remove the redundant standby mode (it is causing errors in the CISCO logs)?
Solved! Go to Solution.
05-24-2018 02:06 PM
Carroll,
I suspect there might not be much draw in the chassis, but before we look into that, what errors are you seeing?
--
Niko
05-24-2018 01:45 PM
05-24-2018 02:02 PM
Power is set to N+1
05-24-2018 02:06 PM
Carroll,
I suspect there might not be much draw in the chassis, but before we look into that, what errors are you seeing?
--
Niko
06-01-2018 11:02 AM
The error that is reported is:
[FSM:FAILED]: Cap the power consumption of chassis 1(FSM:sam:dme:EquipmentChassisPowerCap). Remote-Invocation-Error: Error in setting power cap budget-MC Error(-5): Error Executing Command
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide