Adding new B200 M3 Error

[molivere17982]

Hello all.

I've added a new B200M3 to my chassis and created a clone of one of my existing B200M3 profiles and I'm getting the following error. I've never seen this before and attached a picture

[Kirk J]

You might want to confirm that the blade is running a matching CIMC,BIOS, Board controller firmware versions that come from the same package.  I've seen some similar messages where a CIMC is updated but not the BIOS.

Kirk...

[AFROJ AHMAD]

Hi , 

Server is stuck during Service profile association.

Follow the below steps #

Go to Service profile of this server  >> Removed management package from service profile

Then  assosciate service profile.