cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
5822
Views
0
Helpful
13
Replies

Adding ports to a vlan on Fabric interconnect (End-host Mode)

selby maake
Level 1
Level 1

Hi All,

 

I have an issue, i created vlan 99 and added the ports and port-channel to the vlan on the ucs fabric interconnects and saved the configs.

 

To my surprise nothing has changed, they are still on vlan 1 (default).

See my configuration below.

UCS-A# scope eth-uplink
UCS-A /eth-uplink # create vlan EMM_NET 99
UCS-A /eth-storage/vlan* # create member-port a 1 15
UCS-A /eth-storage/vlan* # create member-port a 1 16
UCS-A /eth-storage/vlan* # create member-portchannel a 61
UCS-A /eth-uplink/vlan* # set sharing none
UCS-A /eth-uplink/vlan* # commit-buffer
UCS-A /eth-uplink/vlan #

Or should i only create vlan 99 on the northbound switch (Nexus5548UP) since the Fabric Interconnect is in end-host mode?????????????

 

Regards,

1 Accepted Solution

Accepted Solutions