B200 M3 board controller compatibility

[richardbrown1983]

Can some one confirm the board controller compatibility for a B200 M3 server we operate at the firmware version 2.1(3d) and have just recieved new blades. They have come at the same firmware version yet the board controller is at version 13.0 whereas all the other servers in the environment are at version 11.0.

I get an error that the service profile cannot be fullfilled due to the board-controller updated unsupported..

Thanks in advance.

[Walter Dey · Accepted solution]

Maybe its related to

https://supportforums.cisco.com/discussion/12265636/board-controller-not-updated-host-firmware-package

Board controller cannot be down graded from 13 to 11.

Can you please post the error message !

[Keny Perez]

Very likely you have a Host Firmware Package (HFP) that is specifying a lower Board Controller version, check if you are using a HFP and then check the version you are specifying there.

-Kenny