C210M2 Host Update CD fails
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
01-29-2013 07:50 AM - edited 03-01-2019 10:50 AM
I have a C210M2 for which I wanted to apply the CD with ucs-c200-huu-1.4.3p.5
It boots up the CD, then I get;
Fetching system information (Approx Time :2min)
Collection the PID value from SMBIOS/etc/rc.local: line 732 [: too many arguments]
I waited 40 minutes and and never got any farther...
- Labels:
-
Unified Computing System (UCS)
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
01-29-2013 07:55 AM
Jason,
Can you post the summary screen from your CIMC gui, showing PID, Serial etc.
When booting the HUU image, I assume you're mapping the ISO with virtual media through the KVM screen. Ensure you have no other USB devices inserted to the server.
Try two things:
1. Try to clear the CMOS. CIMC - Server tab - BIOS - "Clear BIOS CMOS".
[if that doesn't resolve it]
2. Unplug server & physically reset the CMOS ==> http://www.cisco.com/en/US/docs/unified_computing/ucs/c/hw/C210M1/install/install.html#wp1349053
Regards,
Robert
