Unified Computing System Discussions

I'm putting new USC blade servers to production. I've discovered that if I set correct time zone for my city ( "Asia/Yekaterinburg (Moscow+02 Urals)" ), the time shown in USC Manager is one hour behind the actual time. It seems that this bug is relat...

Just want to verify communication between UCS servers on same chassis but having active vNICs on different FIs (Diagram attached). I suppose all commuication between server-A & server-B will happen through Layer 2 switch as server-A will generate an ...

My fabric A is primary and fabric B is sub. but when I try to ssh into fabA ip, I get to fabA.when I ssh into fabB ip, I still get to fabA.when I ssh into the cluster ip, it get to fabA.Do I need to failover to fabB before I get ssh into fabB?

Hello!I need...... configuration best practice guide for UCS C460 M2.1. what is the memory configuration of max memory clock?  ex) 16GB pair kit, 32DIMM slots -> Total size ; 512GB, clock speed : 1066Mhz?2. When install of all memory,  what's the mem...

Hi there, I can;t get the CIMC-Express component of the SRE to work. I have the followed the document here to the tee: http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/cimce/1.0/configuration/guide/CIMCe.htmlI have the SRE working ...

any idea how I can enable cdp on a standard vswitch?

Hello, I'm curious if anyone has had success with connecting virtual media from the command line from a Windows server (map to local ISO/connect to CIMC)?  Basically I need to mount an ISO programatically, and CIMC/virtual media is outside of the UCS...

Hi,i'm istalling a new B-230-M2 with a M81KR interface card and after i associate  the service profile the nic1 went down with error code F0207.I tried to reacknowledge the server but it doesn't fix the problem any idea?Solved i forgot to configure t...

Hi all,  I am attempting to boot a host over iSCSI but have run into a brick wall trying to get my host to boot after successfull install of the OS.Without changing the service profile I am able to install and boot VMWare ESX fine.  Windows just does...

Hi,I have UCS system with Cisco B200 M3 servers. Each server has 2x Toshiba 300Gb HDD.From the start, Service profile for server was configured with "Any Configuration" storage policy and Linux was installed on server.Now, we want to install one OS t...

I am conducting testing on our Fibre Channel infrastructure before we bring some new systems online. During the FC testing, I noticed some odd behavior that I don't think should be happening. Configuration:2x UCS 6248 FIs, 2.0(4a)2x MDS9148 5.2(2a)B2...

Hi Folks,Sorry for the newbie question..Just want to know what command do I use on the FI to display its config?Thanks

where can I get an ordering guide for Unified computing?.Thanks          

Hi guys, we have a UCB C200 M3 and server 2012 + hyper-v 3.0 failover clusterwe set up a simple topology where we have on its servers (2012) 02 nics (one for hyper-v hosts and other for VM´s virtual switchwhen we restart the servers for updates or ma...