C220 M5SX 10GBE NIC not showing up

[itguy1024]

I have a C220 M5SX that will be used for our VCSA. It's in standalone mode and I have access to the CIMC over the mgmt port. It came with two 10GBE ports and I'd like to use them for access / traffic since I can have some redundancy then. I don't see the 10GBE nic listed anywhere in the CIMC.

[Kirk J]

Greetings.

With the exception of the VIC cards/ports, the CIMC does not manage/configure LOM ports or 3rd party NICs.

You can adjust the Option ROMs for the LOM ports or disable the LOMs all together.

When you boot your OS installer, does the OS see the 10Gb/t ports?

Thanks,

Kirk...