08-20-2015 10:46 PM - edited 03-01-2019 12:20 PM
I have few C240M4 Server was install Nvidia GRID K2 GPU card, all install Hyper-V 2012R2 server, but find out one of the server in OS level cannot discover the GPU card, on the other hand in CIMC was show the GPU card attached, so any one know what is going on ? other don't have that issue, do have any idea ?
08-25-2015 07:51 AM
Hi Chun,
Have you installed the drivers? Can you see that in device manager? Please try to install the drivers by downloading it from the below link:
http://www.nvidia.com/download/driverResults.aspx/88811/en-us
Let me know if that works.
*Please do not forget to rate all useful posts.
Regards,
MJ
08-25-2015 08:36 AM
Hi MJ,
Actually I have install the driver, but dunno why can't see in the Hyper-v manager.
Regards
Eric
08-25-2015 09:25 AM
Hi Eric,
Thanks for the info. I don't have much expertise on Hyper-V, but it seems like u are looking for RemoteFX for your VMs, correct me if I'm wrong.
Are you able to see the GPU similar to below picture?
Regards,
MJ
08-25-2015 06:53 PM
Hello MJ,
Yes, but as I see the RemoteFX should be on, but don't why ? do you know any command that I can verify the RemoteFX is on or not ?
08-26-2015 11:28 AM
Hi Chun,
Here is the config guide:
http://social.technet.microsoft.com/wiki/contents/articles/16652.remotefx-vgpu-setup-and-configuration-guide-for-windows-server-2012.aspx
Note: If you have Gen-2 VMs, RemoteFX is not supported.
Regards,
MJ
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide