05-26-2021 10:02 AM
Hi Guys,
I have one C220 M3 server with 4 500 GB HDD CC03 and I have one of them shows moderate fault, then I decided to replae that HDD with another one, but the new one is CCO2 FW version, my question can rebuild success? or need to be in the same FW for all HDDs?
By the way I inserted and now is rebuilding, and hope problem will be solved!
Thanks for all
Mohammad Saeed
Solved! Go to Solution.
05-26-2021 10:08 AM
We run into that pretty frequently in TAC (replacement drive ships with different firmware than what the rest of drives are already running) and it is normally not an issue.
It would best practice once VD is healthy, to schedule maintenance window to bring everything up to same version via HUU.
Kirk...
05-26-2021 10:08 AM
We run into that pretty frequently in TAC (replacement drive ships with different firmware than what the rest of drives are already running) and it is normally not an issue.
It would best practice once VD is healthy, to schedule maintenance window to bring everything up to same version via HUU.
Kirk...
05-26-2021 10:19 AM
Hey Kirk,
thanks for your sharing experience !
but my Virtual Drive now is moderate fault status, do you think change HDD will solve the issue? until now is 77% in rebuild status.
05-26-2021 10:49 AM
The virtual drive will show the fault while the disk is rebuilding. This is expected.
Once the rebuild is complete, the Virtual and Physical drive status should both report healthy.
05-26-2021 11:40 AM
Hey Wes, Yes it's done, VD is healthy with Zero fault! Thanks,
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide