Trying to migration UCS FI 6248 and to UCS FI 6454.Current UCS FI 6248 has FC ports on GEM2. The migration document mentions these two points:Ensure that you unconfigure the unified ports on the Cisco UCS 6200 Series Fabric Interconnects. Because a U...
Forum Posts
Hello, I have an ESXi installed on a C220 M5 server.The OS is installed on an SD card.I can see that the server has both Cisco FlexFlash and FlexUtil and both show (CIMC) that they have a 32GB SD I recently bought a C220 m5 to be used as a secondary...
After moving my hyperflex - one node get a error. Have you any idea? i try to recover server (wizard), but it not result
Please help me find answers to questions.Will the SmartNet contract be valid for UCS purchased from an authorized reseller but equipped with a mix of original and non-original memory?Will the SmartNet contract cover the entire server and its componen...
2 weeks ago, as part of deploying a new UCS deployment with 6332-16UP FIs I upgraded the FW from 4.0(4c) to 4.1(3b) I received the below minor fault:"Partition bootflash on fabric interconnect A is clean but with errors." Code F2016After consulting s...
Hello,I have never had a problem with this before but when I map the image in the java CIMC KVM and reboot the box I do not see a bootable DVD drive from my map. This is a c220 M5 (ISE SNS appliance) Inside CIMC I have switched it between boot mode ...
I need to assign user to UCS Manager KVM restricted access , only user suppose to access KVM console, start/reset/shutdown the server. I have tries few roles in the user services but no luck, can anyone help me?
Hi,I'm writing a script to search our UCS Central for unused VLANs. I'm using Get-UcsCentralVlan and Get-UcsCentralFabricVlanReq to list VLANs, but I just can't figure out the relation between them. I would like to know if there is a 1:n relation or...
Hi All,I have a server UCS c220 M3 server (installed with VMware ESXi) and it is fully functional until yesterday.We restarted the system in planned maintenance, Now black screen and no beep only fan start all led are green. Any suggestions would b...
Resolved! Bandwith: VIC1440 with IOM 2204
Hello, I have a blade server with two vNICs configured. One via Fabric Interconnect A and the other is directed via FI B.Now I would like to have 20G per vNIC, how do I achieve this? This is my configuration:- Server: B200 M5 | VIC: 1440- Chassis: 51...
Resolved! UCSB-MRAID12G-HE disk queue length?
Hi, I’m most of the way through rebuilding my home lab and have swapped to Cisco UCS M4 generation gear and am also using UCS manager. I’m continuing to run VMWare vSAN so tracked down the required UCSB-MRAID12G-HE controllers for my B200M4 blades. T...
I'm trying to enable SR-IOV to work with the following setup:C220M5SOnboard NIC is the Intel X550T dual port adapterESXi version 6.7u3Latest HUU applied to all firmware (shows 4.1.3c in CIMC)SR-IOV is enabled under the PCI settings in BIOSI've select...
Resolved! Boot Host via SSH (CIMC)
Hey together, I searched the internet for quite some time and didn't really find what I need so I decided to ask here now. We are currently running 3 Host servers in a cluster for VMWare.Each server is connected with one power supply to a UPS and one...
Hello community,today, i receive the message from one of our Servers, that the service profile is not available. First message: Service profile ESX48 cannot be accessedSecond message: Connectivity between the CIMC and one of the FIs is down. Connecti...
Is there a Cisco UCS Platform Emulator User Guide?
