08-26-2013 02:08 AM - edited 03-01-2019 11:12 AM
Hi,
I need your help!
I know FI-6100 doesn't support to be configured its some port on GEM as server ports.
Is it possible to configure some ports on FI-6200UP GEM as server ports?
And also, I wonder that some ports(1/9-16) on a port group(Second) can be configured as a server port(1/9-10), uplink ethernet port(1/11-12), FCoE port(1/13-14), and FC port(1/15-16).
Thanks in advance.
Paul
Solved! Go to Solution.
08-26-2013 04:26 AM
Hello Paul,
Yes, you can configure server ports on Expansion modules on FI 6200 series.
--------- snip ------------
All of the port types listed are configurable on both the fixed and expansion module, including server ports, which are not configurable on the 6100 series fabric interconnect expansion module, but are configurable on the 6200 series fabric interconnect expansion module.
----------------------
HTH
Padma
08-26-2013 04:26 AM
Hello Paul,
Yes, you can configure server ports on Expansion modules on FI 6200 series.
--------- snip ------------
All of the port types listed are configurable on both the fixed and expansion module, including server ports, which are not configurable on the 6100 series fabric interconnect expansion module, but are configurable on the 6200 series fabric interconnect expansion module.
----------------------
HTH
Padma
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide