10-23-2013 07:20 AM - edited 03-01-2019 11:19 AM
Hello there.
We are changing the blade on a service profile from a B200 M2 to a B200 M3 because
we need more memory on this fysical server SQL server.
But when I try to boot it hangs att reboots i think its because its a different fiber adapter driver on M3.
We are booting on SAN disk.
How can I install the new fiberadapter drivers to the server (Windows 2012)
10-24-2013 03:09 AM
Hello Tom,
What adapter is installed on new B200 M3 server and old B200 M2 server ?
If it is Cisco VIC adapter, you need to install enic ( LAN ) and fnic ( HBA ) drivers on the Windows server.
Padma
02-27-2014 07:37 AM
I had the same problem. Updating the driver (at least in Windows 2008 R2) did not help. The new device needs to be added in the CDDB (critical device database) in the registry. See this blog http://jeffsaidso.com/2012/07/painless-hardware-upgrades-with-cisco-ucs/
02-27-2014 09:35 AM
It might well be, that enic/fnic driver for your B200-M2 are not according the interop. matrix for B200-M3, see
and
https://supportforums.cisco.com/thread/2163917?tstart=0
I don't see B200-M2 being certified for Windows 2012 ?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide