Cisco 6120XP With B200 M2/M3 Blades

[faizansyed]

Hi

I have a Cisco 6120XP Fabric Interconnects which have a mix of Cisco B200 M2 and M3 blades on them

As they are already on EOL, I wanted to know what is the highest version of Firmware I can go on them on both FI and blades   

Thanks

[Sergiu.Daniluk]

Hi,

For the UCS Manager, we can look at the release notes: https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/release/notes/CiscoUCSManager-RN-3-1.html 

Starting with Cisco UCS Manager Release 3.1(1e), Cisco UCS Manager does not support the hardware listed in the following table:

Table 3. Deprecated hardware from Release 3.1(1e)Hardware TypeProduct

Fabric Interconnects

UCS 6120 (N10-S6100) UCS 6140 (N10-S6200)

You may also have a look at this tool where you can find SW/HW compatibility:

https://ucshcltool.cloudapps.cisco.com/public/ 

Hope it helps,

Sergiu