Cisco UCS Simulator

[Kevin Dann]

Hi

I have installed the Cisco USC Simulator and for some reason under the Admin > Communication Management tab the Management IP Pool (ext-mgmt) tab does not exist. Any reason why this is happening.

Regards

Kevin

[varbalak]

Check under LAN->Pools->root->IP Pools.

[Kevin Dann]

I have checked this and the following IP address exist..

the other issue is that i cannot connect to the KVM Console.

[Keny Perez]

Kevin,

KVM is not supported for the emulator, check this thread: 

https://supportforums.cisco.com/thread/2047323   and also the release notes for the emulator (http://tools.cisco.com/squish/7a5d1)

Keyboard/Video/Mouse (KVM)— KVM is a cut-through interface. Cisco UCS Platform Emulator

does not support KVM because there are no physical servers attached to the emulation system to

which KVM could connect. Launching the KVM console does not display an error message.

What UCS Emulator are you running?

UCS Manager 2.0 and prior had the Management IP Pool in the Admin Tab, in 2.1 it looks like it is in the LAN tab and is called "IP pool ext-mgmt" in the screenshot you pasted above.

I hope this helps you.

-Kenny