Unified Computing System Discussions

Engage with peers and experts on UCS and HyperFlex topics.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Cisco UCS X-Series Energy Efficiency Offer

 

Forum Posts

Hi,I installed ESXi 5.1.0 on UCS B230 M2 Blade, after IP address Configuration then appears the below:"Download tools to manage this host fromhttp://192.168.60.101/ (static)" But i can't ping this IP Address and I can't reach it by http.I use the sam...

Luke Akpor by Level 1
  • 22668 Views
  • 18 replies
  • 0 Helpful votes

We're in the process of replacing our UPS unit inside one of our data centers whicih currently houses one of our UCS's, everything needs to be shutdown in there, so I was wondering what's process for properly shutting down the UCS. We have the follow...

With Robert BurnsWelcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about Cisco's line of VICs adapters for the Unified Computing System (UCS) B and C Series with Cisco expert Robert ...

I am having B200 M3 blades of 40 nos, I am installing W2K8 R2 from iso but it is taking 4 hrs to install on local HDD of RAID 1. I tried from diff iso and from server to server (blade to blade of 10g) that too also taking the same time. Please sugges...

anandrajt by Level 1
  • 494 Views
  • 2 replies
  • 0 Helpful votes

Hello,I am trying to set up iSCSI boot of ESXi on a B200-M2 w/ M71KR-Q card on it.I add vNIC A and B (each tied to one fabric repectively), but when trying to set up an iSCSI vNIC - I get the error that "Not enough vNICs available".From searching aro...