08-11-2013 10:54 AM - edited 03-01-2019 11:11 AM
Hi,
I'm designing a Cisco UCS Blade server enviroment and want to use Cisco VM-FEX. I also have Cisco Nexus 5548UP and Nexus 7009 & 7004 datacenter switches. I need advice on the following:
Thank you.
Michael.
08-11-2013 11:04 AM
Also,
Thank you.
Michael.
08-16-2013 09:00 AM
Hello Michael,
1. VM-FEX Parent Switch (Controlling Bridge) could be
- Cisco 6100/6200 Fabric Interconnect : Support ESXi, Hyper-V and Redhat KVM
- Nexus 5500 switch, Nexus 6000 switch with VM-FEX license: Support ESXi
2. Nexus 7k is not supportted to be the parent switch
3. VM-FEX and Nexus 1000v are mutually exclusive on a single UCS blade. Also each VM-FEX interface is independnet and one could have both emulated and pass-through mode on the same VM
4. Both VM-FEX and Nexus 1000v utilize VEM mondule on ESX host but they are different binary files. VM-FEX VEM
could be donwloaded from driver ISO
Downloads Home > Products > Servers - Unified Computing > Cisco UCS B-Series Blade Server Software > Unified Computing System (UCS) Drivers-2.1(2a) |
5. VM-FEX currently only support Ethernet traffic
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide