- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
01-15-2012 09:41 AM - edited 03-01-2019 10:13 AM
Hello,
I was told in a presentation a couple of months ago that there is a 300+ pages document describing in detail how to set up a Netapp Flexpod solution. I have been looking everywhere for this document. I have found many, e.g UCS Deployment Guide from Cisco, but not a huge detailed document. Can anyone provide me with a link to this document, please?
Solved! Go to Solution.
- Labels:
-
Unified Computing System (UCS)
Accepted Solutions
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
01-15-2012 04:28 PM
Hi,
I'm not aware of any 300+ page document, however you could use the following as a starting point:
Design Zone for FlexPod
http://www.cisco.com/en/US/solutions/ns340/ns414/ns742/ns743/ns1050/landing_flexpod.html
FlexPod Deployment Guide
http://www.cisco.com/en/US/docs/solutions/Enterprise/Data_Center/Virtualization/flexpod_deploy.html
VMware built on FlexPod Deployment Guide
http://www.cisco.com/en/US/docs/solutions/Enterprise/Data_Center/Virtualization/flexpod_vsphere.html
FlexPod for VMware Deployment Model
http://www.cisco.com/en/US/docs/solutions/Enterprise/Data_Center/Virtualization/flexpod_vmware.html
Hope this helps.
Thanks,
Michael
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
01-15-2012 04:28 PM
Hi,
I'm not aware of any 300+ page document, however you could use the following as a starting point:
Design Zone for FlexPod
http://www.cisco.com/en/US/solutions/ns340/ns414/ns742/ns743/ns1050/landing_flexpod.html
FlexPod Deployment Guide
http://www.cisco.com/en/US/docs/solutions/Enterprise/Data_Center/Virtualization/flexpod_deploy.html
VMware built on FlexPod Deployment Guide
http://www.cisco.com/en/US/docs/solutions/Enterprise/Data_Center/Virtualization/flexpod_vsphere.html
FlexPod for VMware Deployment Model
http://www.cisco.com/en/US/docs/solutions/Enterprise/Data_Center/Virtualization/flexpod_vmware.html
Hope this helps.
Thanks,
Michael
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
01-16-2012 12:14 PM
Thanks. Mayve I was wrong. Basically, I need examples of all the commands I need to configure everything, and hopefully it is in the documents you posted. Anyway, I ordered the Trainsignal UCS course. Seems very good.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
01-16-2012 03:27 PM
Depending on which document you look at, some of the details that it contains include:
- configuration steps
- sample completed configuration
- provides links to videos detailing other configuration steps
Thanks,
Michael
