CPU, Memory, Temp and Storage of UCS-E M1 blade

[dastrix80]

Hi All,

Cant seem to find how to monitor these parameters of a blade inside the 3945.

Can anyone point me in the direction of how?

An API would be great

Thanks

kris

[Kirk J · Accepted solution]

Greetings.

You will want to poll those from the configured CIMC of the blade.

See https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/e/2-0/sw/gui/config/guide/b_2_0_GUI_Config_Guide/b_2_0_GUI_Config_Guide_chapter_01010.html

for info on configuring communication services on CIMC (i.e. xml api, SNMP, etc)

If you go the SNMP route, the typical MIBs you would want to have downloaded are:

SNMPv2-SMI.my
RFC1155-SMI.my
SNMPv2-TC.my
SNMPv2-CONF.my
SNMPv2-SMI-v1.my
CISCO-SMI.my
RFC-1212.my
SNMP-FRAMEWORK-MIB.my
CISCO-UNIFIED-COMPUTING-MIB.my

CISCO-UNIFIED-COMPUTING-STORAGE-MIB.my
CISCO-UNIFIED-COMPUTING-TC-MIB.my

https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/mib/b-series/b_UCS_MIBRef/b_UCS_MIBRef_chapter_0100.html#r_ciscoucsmanagermibs

The actual MIB download location will be the same MIB files as the "C" rack series servers at:

ftp://ftp.cisco.com/pub/mibs/supportlists/ucs/ucs-C-supportlist.html

Thanks,

Kirk...

[dastrix80]

Thank you Kirk ill go ahead with that

[dastrix80]

Hi Kirk struggling with this

I can SNMP walk my devices but ive no idea what OID references what parameter

Surely theres an easy way to do this?

Any help would be great

Thanks

[dastrix80]

Anyone?

A table that shows OID - Common english use ie: CPU temp

Seems impossible to find this information!