Hi All I have a reoccuring issue in that the UCSE IP address on the management port goes down for some reason and my SNMP traps fail. What I would like to do, is use a TCL script or something to ping this ip address (192.168.0.8) and if it fails, exe...

Hi All When  I SNMP walk the chassis for the disk state I get the following, where there are two x 900GB SAS drivessnmpwalk -v 2c -c LAN 192.168.0.8 1.3.6.1.4.1.9.9.719.1.45.4.1.10 iso.3.6.1.4.1.9.9.719.1.45.4.1.10.1 = INTEGER: 10iso.3.6.1.4.1.9.9.71...

Hi All I can ping the UCS interface on the router, but not my LAN which means I cannot HTTP to the IMC unit to manage it. This was working fine until I created an ip host entry <domain name> 192.168.0.8 I am pinging from 192.168.0.10 Odd Any suggesti...

removed

Hi All   The SFP matrix says its supported but I see this in the log:   *Jan  2 00:10:17.312: %PHY-4-SFP_PLUS_NOT_SUPPORTED: The SFP PLUS in Te1/0/1 is not supported*Jan  2 00:10:17.312: %PM-4-ERR_DISABLE: gbic-invalid error detected on Te1/0/1, putt...